JVC KD-X330BT Instruction Manual page 29

INSTALLATION / CONNECTION
Installing the unit (in-dash mounting)
Orientate the trim
plate as illustrated
before fitting.
When installing without the mounting sleeve
1 Remove the mounting sleeve and trim plate
from the unit.
2 Align the holes in the unit (on both sides) with
the vehicle mounting bracket and secure the
unit with screws (commercially available).
Use only the specified screws. Using wrong screws might
damage the unit.
Hook on the top side
Bend the appropriate tabs to hold
the sleeve firmly in place.
How to remove the unit
Do the required wiring.
( 26, 27)
Dashboard of
your car
Part list for installation
(A) Faceplate (B) Trim plate
(C) Mounting sleeve (D) Extraction key
(E) Wiring harness (F) Wiring harness
(for KD-X330BT) (for KD-X33MBT)
25
ENGLISH