JVC KD-X330BT Instruction Manual page 14

BLUETOOTH®
Auto Pairing
When you connect the iPhone/ iPod touch/
Android device to the USB input terminal,
pairing request (via Bluetooth) is automatically
activated.
Press the volume knob to pair once you have
confirmed the device name.
Automatic pairing request is activated only if:
– Bluetooth function of the connected devcie is
turned on.
– [AUTO CNNT] is set to [ON]. ( 13)
– JVC MUSIC PLAY application is installed on
the Android device ( 7) and [AUTO MODE] is
selected ( 8).
10
BLUETOOTH — Mobile phone
Receive a call
When there is an incoming call:
• The buttons will blink in the blinking pattern you have selected in [RING ILLUMI]. ( 11)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected time. ( 11)
During a call:
• The buttons stop blinking.
• If you turn off the unit or detach the faceplate, the Bluetooth connection is disconnected.
To On the faceplate
First incoming call...
Answer a call
Press
Reject a call
Press and hold
volume knob.
End a call
Press and hold
volume knob.
On the remote control
Press
or the volume knob.
Press and hold
or the
Press and hold
or the
.
.
.