Table of Contents
Advertisement
Connect the power cord to the power supply
7.
and to a power outlet that is on a circuit with
no other equipment connected to it.
Connect each power supply in the chassis to
a separate AC circuit.
Specifications
Input current (maximum)
Input voltage
Line Frequency
Power consumption
Thermal rating
9158FA
8.
12 to 6 A
100 to 240 VAC
47 to 63 Hz
1112 W
3792 BTU/hr maximum
Turn on the power switch.
Note: In a chassis that requires two
power supplies (nonredundant
configuration), you must turn on both
units within 2 seconds of each other.
If you wait longer to turn on the
second power supply, both power
supplies will latch off. To correct this
condition, turn off both power
supplies, wait at least 30 seconds, and
turn both power supplies on again
within 2 seconds.
9159FA
5
Advertisement
Table of Contents
