Advertisement
Example configuration
This hypothetical example show the various items required for a customer quotation of a Redundant Power Supply Unit 15.
A customer wants to provide power redundancy with the Redundant Power Supply 15 to the following Nortel switching
products:
1 x Ethernet Routing Switch 5510-24T
1 x Ethernet Routing Switch 5520-48T-PWR
1 x Ethernet Switch 470-48T
1 x Ethernet Switch 470-48T-PWR
1 x BayStack 380-24F
Your Redundant Power Supply 15 quote should include the following components:
Order
Product Description
Number
A
AA0005017
Redundant Power Supply 15 - Chassis (Supports three power supplies).
Redundant Power Supply 15 - 600 Watt Redundant Power Supply
B
AA0005A19
Module. Installs in RPS 15 Chassis AA0005017, and requires purchase of
RPSU connection cable. (No Power cord).
Redundant Power Supply 15 Short Connecting Cable (3m/10ft) for up to
C
AA0005021
4 x Ethernet Routing Switch 5510, Ethernet Switch 470, 380, Optera
Metro 1200, 1400, 1450.
Redundant Power Supply 15 - Connecting Cable for Single Ethernet
D
AA0005018
Routing Switch 5520, 5530 or Ethernet Switch 470-PWR
-48 V DC-to-DC converter, for installation in the Ethernet Routing
E
AL1904007
Switch 5510-48T and 5510-24T, for use with the BayStack 10.
-48 V DC-to-DC converter, for installation in the Ethernet Switch 470-
F
AL1904005
48T, for use with the BayStack 10 Power Supply Unit.
-48 V DC-to-DC converter, for installation in the BS 380 or BPS, for use
G
AL1904006
with the BayStack 10 Power Supply Unit.
A) A Redundant Power Supply Unit 15 chassis to house the 600W Redundant Power Supply Modules is required;
B) In total three 600W modules are needed: All PoE switches need a separate 600W module. In this example we need two
for PoE switches: one for the Ethernet Routing Switch 5520 and one for the Ethernet Switch 470-48T-PWR. 3 Non-
PoE switches like the Ethernet Switch 470,the Ethernet Routing Switch 5510 or BayStack 380 require a third 600W
module; Now all three slots of the chassis are filled with 600W Redundant Power Supply Modules. You can choose
various power cord options, this example is without a power cord.
C) When connecting Non-PoE switches like Ethernet Switch 470, Ethernet Routing Switch 5510 or BayStack 380, you can
use the 1 : 4 cable that allows you to connect up to four switches to one 600W module. In this example, the customer
could add another Non-PoE switch in the future
D) When connecting a PoE switch like the Ethernet Routing Switch 5520-24T-PWR or Ethernet Switch 470-48T-PWR to
the Redundant Power Supply unit 15 a 1:1 connecting cable is required to connect each PoE switch to one separate
600W module. In this example we have two of these switches, so we need two connecting cables.
E) Some switch models require a separate DC-to-DC converter to enable the DC power slot at the back of the switch and
connect a DC cable. This DC-to-DC converter is typical for the Ethernet Routing Switch 5510;
F) To connect an Ethernet Switch 470 to the Redundant Power Supply 15, this DC-to-DC converter, that is specific to
the Ethernet Switch 470, is required.
G) To connect a BayStack 380 to the Redundant Power Supply 15, this DC-to-DC converter, that is specific to the
BayStack 380, is required.
Please note that although Ethernet Routing Switch 5530-24TFD is not a PoE switch, it has a 1:1 requirement for a 600W Redundant Power
Supply module. Also the DC-to-DC converter is already inbuilt. So from a RPS 15 engineering perspective, you should treat it as if it is a 5520
or 470-PWR switch.
Technical Specifications
Interfaces
Electromagnetic
Compatibility
MTBF
Noise level
Standard AC wall plug- NEMA 5-15 P (AC in)
DC connector
EN55022/CISPR 22, Class A, EN55024/CISPR 22, Class A, VCCI, Class A (Japan),
BSMI Class A (Taiwan), ACA, AS/NZ 3548, Class A (Australia), FCC Part 15 Class
A (US)
>2,000,000 hours
<60 dBA
Qty.
1
3
1
2
1
1
1
3
Advertisement
