Nortel Versalar 15000 Quick Reference page 3

Table 2. Displaying Configuration Help
Task
Display Help for an object or parameter.
Show all objects configurable from your current location in the tree.
Show the entire tree of configurable objects.
List the names of all objects, parameters, and commands that you can enter at
this level. (The BCC immediately displays output upon detecting the ? character,
which it does not display.)
Show the configuration syntax and list the parameters of an object that you can
configure from your current location in the tree.
Display the supported values for this parameter of the current object.
List the values assigned to parameters of the current object.
Table 3
contexts of other objects, and change your current context.
Table 3. Navigating the Configuration Tree
Task
Enter configuration mode from the system prompt.
Show the full context, starting from the root level.
Show objects configured at the next (branch) level.
Show objects configured at all branch levels descending from the
current object, and the paths to those objects. If at the box# prompt,
show all objects in the configuration and the paths to those objects.
List only the configured objects that match the specified pattern.
Show the total device configuration in BCC syntax.
Go back one level.
Return to the root level of the router configuration.
Go to a configured object from any location in the tree.
Table 4
302771-E Rev 00
shows how to enter configuration mode, display your current context and the
shows each basic configuration task, the associated command, and examples.
Configuring the Versalar 15000
Command
help <item>
help tree
help tree -all
?
<object> ?
<parameter> ? bofl ?
info
Command Examples
config config
pwc pwc
lso lso
lso -r lso -r
lso [-r | <pattern> ] lso *o*
lso "ip/1.2.?.?/*"
show config [-all] show config -all
back back
box box
<unique_id> bgp
ethernet/9/1
ip/1.2.3.4/255.0.0.0
Examples
help snmp
help bofl
help tree
help tree -all
?
ip ?
info
3