Room-To-Room Communication; Technical Precautions; Specifications - Aiphone JK-1SD Manual

6-3 Room-to-room communication

1
Press CALL button to talk with the other person.
• A call-in is sent to the master monitor station.
• The reply of the other person is not heard.
NOTES:
1. Room-to-room communication ends automatically after approx. 10 minutes.
To perform room-to-room communication again, repeat from the beginning.
2. If a call is received from the entrance during room-to-room communication,
a chime tone sounds. Press OFF button to end the room-to-room
communication, and press TALK button to switch to communication
with the door station.
6-4 If optional units are installed
1
When a separately-installed sensor detects a malfunction or CALL
button is pressed, the alarm sound occurs and the transmit LED (red)
flashes.
7

TECHNICAL PRECAUTIONS

• Operating temperature: 0 C to 40 C (+32 F to +104 F)
• Cleaning: Clean the units with a soft cloth dampened with a neutral household cleanser. Do not use any abrasive cleaner or cloth.
• If there is a system malfunction, turn the POWER switch at the master station OFF and back ON again. If this does not solve the problem, unplug
the DC power supply and contact a qualified technician for service.
8

SPECIFICATIONS

• Power source: DC 18 V
• Current consumption: (Max.) 120 mA
• Calling: Chime, approx. 45 seconds
• Communication method: <HANDS-FREE mode> Hands-free: approx. 60 sec.
<PTT mode> Press-to-talk, release to listen: approx. 60 seconds
• Dimensions: 185 (H) x 80 (W) x 27 (D) (mm)
7-5/16 (H) x 3-1/8 (W) x 1-1/16 (D) (inches)
• Weight: Approx. 250 g (0.55 lbs.)
2
If the other person presses
is possible.
Or
3
Press and release
2
Press
1. The ararm sounds aren't interlocked with chime tone volume. The alarm
sounds at a level equivalent to 10 (HIGH) (fixed).
2. The length of the alarm sound varies depending on the specifications of
the connected monitor station.
3. When connecting with JK-1MD, the alarm sound stops after 30 seconds
and restoration occurs even if
- 6 -
TALK button, hands free communication
OFF button to end communication.
OFF button to stop the alarm sound.
OFF button is not pressed.