Ntak03 Tds/Dtr Card; Connecting To The Ports - Meridian Nortel 1 Option 11C Technical Reference Manual

Table 73
Default port configuration
TTY Number
0
1
2

NTAK03 TDS/DTR card

Table 74
Default port configuration
TTY Number
0
1
2

Connecting to the ports

The baud rates available on all three ports are 300, 600, 1200, 2400, 4800, and
19200 baud.
Card Port
0 0
0 1
0 2
Table 74 shows the default settings.
Card Port
0 0
0 1
0 2
The NTAK03 TDS/DTR card is replaced by the NTDK20 SSC card in
Option 11C, and the NTDK97 MSC in Option 11C Mini. However, it is still
supported and can be retained to gain access to extra ports.
The methods by which external devices may be connected to the TDS/DTR
card are:
• Use the NTAK19EC two port SDI cable. The NTAK19EC cable does not
have to be terminated at the cross connect terminal since it is equipped
with connectors.
• Use the NE-A25-B cable and terminate it at the cross connect terminal.
Tables 75 and 76 give the pinouts for the TDS/DTR card.
Use
MTC/SCH/BUG
MTC/SCH/BUG
CTY
Use
MTC/SCH/BUG
MTC/SCH/BUG
CTY
Option 11C and 11C Mini
SDI ports Page 231 of 544
Configuration
1200/8/1/NONE
1200/8/1/NONE
1200/8/1/NONE
Configuration
1200/8/1/NONE
1200/8/1/NONE
1200/8/1/NONE
Technical Reference Guide