Saving Cs 1000/M1 Changes (Ld 43) - Nortel NN44200-313 Quick Start Manual

30 CallPilot resource configuration
6

Saving CS 1000/M1 changes (LD 43)

Perform the following procedure to save all configuration changes. If a
reboot occurs before you save the system, all your changes could be lost.
Tech tip: The prompt for LD 43 is just a period ".". Entering the command
EDD will complete a data dump to the on board flash.
Step
1
2
3
4
Copyright © 2007-2008, Nortel Networks
.
To exit the overlay, enter ****.
Action
Connect to the PBX.
Enter LD 43.
At the "." prompt, enter EDD.
To exit the overlay, enter ****.
Nortel CallPilot
Quickstart Guide
NN44200-313 01.02 Standard
5.0 19 May 2008
—End—
—End—