Bosch Vision 300 Operating, Care And Installation Instructions Manual page 26

Additional options
800 Series
i
Symbol Function
Sets the delay start time
of the dryer
(Start in .. hours!)
Extra care
(more gentle than
Delicates")
Child proof lock (only
effective while the
program is running)
Extra Drying Time
User selectable degree of
dryness
Volume of the end signal
and the damp dry signal
Signal Behavior at the End of the Selected Cycle Signal Behavior at the End of the Selected Cycle
The signal will sound when the cycle is finished to notify The signal will sound when the cycle is finished to notify
the user that the cycle has ended. Wrinkle BlockR will the user that the cycle has ended. Wrinkle BlockR will
tumble the load periodically for approximately one hour
after the cycle ends. The signal will sound at intervals after the cycle ends. The signal will sound at intervals
during Wrinkle BlockR as a reminder the load is finished. during Wrinkle BlockR as a reminder the load is finished.
Spin speed optimized
drying time coordinates
the remaining time
displayed for the dryer to
the spin speed at which
the laundry was
previously spun in the
washing machine
26
Settings Explanation
0-12 h
(0.5 h steps)
On/Off
On/Off
0, 1, 2, 3
(0=default, 1=dryer,
3=dryest)
Off,
medium,
maximum
Event
Enable Signal
Disable Signal
Start of Cycle
End of Cycle (or during Wrinkle
BlockR)
Mal-Operation
Warning of Malfunction
400
600
800
1000
1200
i
i
0
Z
Signal
Short tone
Two short tones
Short tone
Sequence of short tones
Sequence of long tones
Sequence of long tones (maximum
volume)
Z