Connecting A Pc Console - Nortel AN/DC Installation And Operating

Installing and Operating AN/DC and ANH-8/DC Systems
XCVR
Figure 1-8.
Attach the 25-pin receptacle connector on the combined cable and
6.
adapter to the terminal's host connector.
The console is now connected. Proceed to the section
Power

Connecting a PC Console

To connect a PC, you need both pieces in the console/modem cable kit that
shipped with the router (Nortel Networks Order No. 110310):
• Order No. 110307 serial console/modem cable (with 9-pin receptacle to
25-pin plug connectors)
• Order No. 110308 null modem crossover adapter (with two 25-pin receptacle
connectors)
You also need another standard serial cable with a 25-pin plug connector.
1-14
UTP CONSOLE COM 2
TX
RST
RX
CL
RSLD2 RSLD1
Connecting a Terminal Console
Source."
U L
U L
-48VDC
-60VDC
1.5A
COM 1
RTN -VDC
COMM
KB
20 mA PR
Console Cable Plus
Null Modem Adapter
"Connecting to the DC
312410-A Rev 00
AN0011B