P0873832 Issue 05
This section guides you through the initial installation and setup of
the CTA 500 dm . Installation is carried out from the Personal
Productivity Suite CD-ROM. Use the steps listed below to complete
the installation.
1. Make the physical connections to the CTA 500 dm .
See
Installation and setup
2. ConÞgure the ICS for the CTA 500 dm .
See
Setting up the ICS
3. ConÞgure the Com port on the PC for the CTA 500 dm .
See
ConÞguring the PC serial port
4. Install the CTA 500dm and if required, the Norstar TAPI Service
Provider software.
See
Installing CTA 500dm and Norstar TAPI Service Provider
software
.
First-time setup
CTA 500 dm On Line Guide