Motor Cooling; Storing The Machine - Stihl MSA 160 C Instruction Manual

English

Motor Cooling

Periodically clean the ventilation
N
slots with a dry brush or the like
82

Storing the Machine

Move the hand guard to ƒ.
N
Remove the battery.
N
Turn the machine upside down and
N
shake it – remove chips from battery
compartment.
Remove the saw chain and guide
N
bar, clean them and spray with
corrosion inhibiting oil.
Thoroughly clean the machine,
N
especially the cooling air inlets.
If you use a biological chain and bar
N
lubricant, e.g. STIHL BioPlus,
completely fill the chain oil tank.
Store the machine in a dry and
N
secure location – out of the reach of
children and other unauthorized
persons.
Cover for Battery Compartment
In some markets the machine comes
with a cover for the battery
compartment. It protects the battery
compartment from contamination.
After finishing work, slide the
N
cover (1) home until it engages
audibly in position.
Storing the Battery
Take the battery out of the power
N
tool or the charger.
Store indoors in a dry and safe
N
location. Keep out of the reach of
children and other unauthorized
persons and protected from
contamination.
Do not store spare batteries unused
N
– use in rotation.
To optimize the life of the battery, store
it at a state of charge of about 30%.
Storing the Charger
Remove the battery.
N
Disconnect the plug from the wall
N
outlet.
Store the charger indoors in a dry
N
and secure location. Keep out of the
reach of children and other
unauthorized persons and
protected from contamination.
1
MSA 160 C, MSA 200 C