English
Switching Off
1
2
Release trigger switch (2) so that it
N
springs back into its original position
– in the original position, the trigger
switch is once again blocked by the
trigger switch lockout (1)
The coasting brake stops the saw chain.
Set the hand guard to ƒ – the saw
N
chain is blocked
During breaks and after work, remove
the battery from the machine.
80
Removing the battery
4
3
Press both safety catches (3)
N
simultaneously – battery (4) is
unlocked
Remove battery (4) from the
N
housing
When not using the machine, it must be
put down in such a way that it does not
endanger anyone.
Ensure that the machine cannot be used
without authorization.
Operating Instructions
During operation, check the level of
N
the chain oil tank frequently – see
"Filling chain oil"
Checking the chain tension
Check chain tension frequently
A new saw chain must be retensioned
more frequently than one that has been
in use already for an extended period.
Chain cold
Tension is correct when the chain fits
snugly against the underside of the bar
but can still be pulled easily along the
bar by hand. Retension the saw chain if
necessary – see "Tensioning the Chain".
Chain at operating temperature
The chain stretches and begins to sag.
The drive links must not come out of the
bar groove on the underside of the bar –
the chain may otherwise jump off the
bar. Retension the saw chain – see
"Tensioning the Chain"
After finishing work
Set hand guard to ƒ
N
Remove the battery from the
N
machine
Slacken off the chain if you have
N
retensioned it at operating
temperature during work
MSA 160 C, MSA 200 C