RAID Subsystem DVA-12T | Quick Installation Guide
10
Changing the Configuration via a Web Browser
10.1
Changing an IP Address
The Bosch RAIDWatch application can be used to change the IP address of the subsystem. The
Bosch RAIDWatch application is pre-installed directly on the subsystems drive and can be
accessed with a common standard browser. Alternatively the Bosch RAIDWatch application
can be installed on a host PC (see Section 11 Using Bosch RAIDWatch on the Host Computer).
NOTICE!
•
i
•
To change an IP address via a Web browser:
1.
2.
Fig. 10.1 Logon screen
3.
4.
5.
6.
7.
Fig. 10.2 Bosch RAIDWatch application
Bosch Security Systems
If the RAID is deleted or corrupted you need to re-install the Bosch RAIDWatch applica-
tion on the system. Rerun the Bosch RAIDWatch setup from your CD, select Custom, and
then click Stand-alone (on Subsystem).
The Java Runtime Environment (JRE) 1.42 or higher is required. Using the web interface,
you have to install the JRE on your PC first. The setup for the JRE is on the CD included
with the product.
Open the Web browser.
Type the unit's IP address in the address bar, and then click the Go button.
A Java Applet is loaded and the Bosch RAIDWatch application starts.
In the IP Address box, type or select the IP address.
Select the Enable SSL check box if you want to use the Secure Sockets Layer (SSL) secu-
rity option.
In the Username list, click Configuration.
In the Password box, type the password if needed (factory default: no password).
Click OK. The computer opens the Bosch RAIDWatch application.
Changing the Configuration via a Web Browser | en
F.01U.027.801 | V2 | 2006.07
11