Hardware Configuration; Unpacking; Install Enclosure On The Rack - Bosch CIP5000 Series User Manual

18 en | Hardware configuration
5

Hardware configuration

This section gives the basics on unpacking and hardware installation of CIP5000 units.
Hardware installation includes installing units in the rack, connecting power supplies,
establishing a network, establishing the data and administrative connections to the units, and
installing hard drives.
5.1

Unpacking

CIP-5316W-00N / CIP-5424W-00N
The box contains the following items:
–
–
–
–
–
–
CIP-5316-JBOD
The packing box contains the following items:
–
–
–
–
–
–
–
–
5.2

Install enclosure on the rack

The instructions here apply to 3U 16-bay models CIP-5316W-00N and the JBOD expansion
CIP-5316-JBOD, as well as the 4U 24-bay model CIP-5424W-00N.
Caution!
Do not populate any enclosure hardware with hard drives until it has been securely installed
!
in the rack.
Caution!
At least two persons are required to safely lift, place, and attach the enclosure hardware into
!
a rack system.
Caution!
Do not lift or move the enclosure hardware by the handles, or power supplies. Hold the
!
system itself.
2019-10 | V01 | F.01U.380.030
One of the following storage appliances:
– CIP-5316W-00N
– CIP-5424W-00N
Two 1.83m (6 ft) power cords
Screws for disk drives
Front panel bezel cover
Quick installation guide
(Optional) Sliding rail assembly for rack mounting
CIP-5316-JBOD storage enclosure
Two 1.83m (6 ft) power cords
SFF-8644 external SAS cable
DB9-to-RJ11 serial data cable
Screws for disk drives
Front panel bezel cover
Quick installation guide
(Optional) Sliding rail assembly for rack mounting
User manual
CIP5000 series storage
Bosch Security Systems B.V.