Using Bosch Raidwatch On The Host Computer; System Requirements - Bosch DVA-12T Quick Installation Manual

14 en | Using Bosch RAIDWatch on the Host Computer
11

Using Bosch RAIDWatch on the Host Computer

Bosch RAIDWatch allows you to administrate multiple subsystems from your host computer.
We recommend the installation on a host computer if central management of multiple sub-
systems is required.
11.1

System requirements

Before starting the installation, read through the notes listed below:
•
•
•
Server Running Bosch RAIDWatch
•
•
•
Local Client Running Bosch RAIDWatch Manager
•
•
•
•
•
•
•
•
•
•
•
F.01U.027.801 | V2 | 2006.07
TCP/IP must be installed and running with a valid IP address assigned to a server. The
server can either be used as a centralized management station, a remote client using a
browser to access the array, or directly attached with a RAID subsystem using the in-
band protocols.
Your system display must be running in 256 colors or a higher mode otherwise some con-
figuration items may not be visible. Screen size of 1024 x 768 is recommended to avoid
any graphic transformation
Check to confirm that the RAID disk arrays and controllers are installed properly. For the
installation procedure, see the documentation included with the controller/subsystems.
Computer must be a Pentium or above PC-compatible running Windows 2000/XP and
Windows 2003 that supports Java Runtime 1.4.2 or higher.
256-color or higher mode management station monitor.
At least one available RS-232C port is required (if connection to the controller is through
the RS-232C).
Computer must be Pentium or above PC-compatible running Windows 2000/XP and Win-
dows 2003 (32-bit or 64-bit) that supports Java Runtime 1.4.2 or higher.
Remote station must be running Netscape 4.7X, Internet Explorer 6.0 or Mozilla 5.0 and
Java Runtime 1.4.2 (for a particular platform).
256-color or higher mode management station monitor.
At least one available RS-232C port is required (if connection to the controller is through
the RS-232C).
Windows Messaging (MAPI) for Windows 2000/XP/2003 if fax notification support is
needed.
Windows NetBEUI support for Windows 2000/XP/2003 must be enabled if network
broadcast support notification is needed. Please refer to your Windows documentation
for more information.
SNMP traps service for Windows if SNMP traps notification is desired.
TCP/IP with a valid IP assigned to each controller/subsystem.
A fax modem that supports Hayes AT command protocol is required if using the fax event
notification function. (Fax command class 2.0 and above.)
A GSM modem is required if using the SMS short message event notification function.
Bosch RAIDWatch currently supports two GSM modem models (not in the Bosch product
portfolio and not distributed by Bosch):
– Siemens TC35
– WAVECOM Fast Rack M1206
Under Windows 2000/XP/2003, the Java installation program, installshield.jar, only sup-
ports:
– Netscape 4.5 (or above)
– Microsoft Internet Explorer 4.0 (or above)
RAID Subsystem DVA-12T | Quick Installation Guide
Bosch Security Systems