Registering Your Soundpoint ® Ip 550 Desktop Phone - Polycom SoundPoint IP 550 User Manual

User Guide SoundPoint IP 550 Phone
Note
Registering Your SoundPoint
1 - 8
3. With mounting tab of the base unit facing up, fasten the base unit to the
wall mount using wall anchors (not included).
The wall mount is not included in SoundPoint IP 550 package. Contact your system
administrator if you require one.
®
Generally, your phone will be deployed with multiple other phones. In this
case, your system administrator will configure the phone parameters
beforehand, so that after you set up your phone, the phone will be registered
and ready to use.
If your phone is not part of a large phone deployment, your phone may not be
registered after you set it up. Before you use your phone, you or your system
administrator will have to register it. For detailed information on how to
register your phone after you install it, refer to "Quick Tip 44011: Registering
Standalone SoundPoint IP and SoundStation IP Phones" at
http://www.polycom.com/usa/en/support/voice/soundpoint_ip/VoIP_T
echnical_Bulletins_pub.html
IP 550 Desktop Phone
.