JVC KD-AVX11J Service Manual page 33

Error codes of panel mechanism
Open error
1. Time out error by OPEN position cannot detect.
Close error (ANGLE 1 error)
1. Time out error by ANGLE 1 position cannot detect.
Angle positioning error
Moving to 10 degrees (ANGLE 2 error)
1. Time out error by ANGLE 2 position cannot detect at moving to open position.
2. Missing to ANGLE 1 and detected ANGLE 2 position at moving to open position.
3. Time out error by ANGLE 2 cannot detect at moving close position.
Moving to 20 degrees (ANGLE 3 error)
1. Time out error by ANGLE 3 position cannot detect at moving to open position.
2. Missing to ANGLE 2 and detected ANGLE 3 position at moving to open position.
3. Time out error by ANGLE 3 cannot detect at moving close position.
Moving to 30 degrees (ANGLE 4 error)
1. Time out error by ANGLE 4 position cannot detect at moving to open position.
2. Missing to ANGLE 3 and detected ANGLE 4 position at moving to open position.
3. Time out error by ANGLE 4 cannot detect at moving close position.
Abnormal switch position at moving panel
The Panel move to open and close position, detected abnormal switch position.
4.6.6 Running mode
Indication Explanation
RUNNING1 MECHA Door mecha running 1
RUNNING2 MECHA Door mecha running 2
RUNNING3 DVD DVD+Door mecha running1
RUNNING4 DVD DVD+Door mecha running2
RUNNING5 DVD DVD+Door mecha running3
RUNNING6 DVD DVD+Door mecha running4
RUNNING7 DVD DVD+Door mecha running5
RUNNING8 DVD DVD+Door mecha running6
Cancellation of running1,2 : Press the [EJECT] key
In running 1,2 cancellation, a door does not stop at the position and moves to a panel position.
Cancellation of running3 to 8 : Press the [POWER] key
The number of count and an error cord are displayed in running.
PANEL ANGLE
1 Panel
2
3
4
Open
Detail
Operation contents of 1 cycle
Panel close
Panel close ¨ Panel open
¨ Panel detach position ¨Panel angle
3 position
¨ Panel angle 2 position
Loading
Door open/close
Loading
Door open/close
Loading
5 seconds+Door open/close
Loading
5 seconds+Door open/close
Loading
5 seconds+Door open/close
Loading
5 seconds+Door open/close
Close Main Body
10 degrees
20 degrees
30 degrees
Open
¨ Panel open
¨ Panel angle 1 position
¨ Eject ¨ Wait for 5 seconds+
¨ Eject ¨ Wait for 5 seconds+
¨ Playback ¨ Eject ¨ Wait for
¨ Playback ¨ Eject ¨ Wait for
¨ Playback ¨ Eject ¨ Wait for
¨ Playback ¨ Eject ¨ Wait for
Error code
(Service mode)
0A0001
0B0006
0D0021
0D0022
0D0023
0E0031
0E0032
0E0033
0F0041
0F0042
0F0043
0A0000
In In
mecha error disc error
- -
Retry -
RETRY
Stop -
NO RETRY
-
Stop
-
Retry
Stop Stop
Retry Stop
Stop Retry
Retry Retry
(No.MA304)1-33