JVC KD-AVX11J Service Manual page 29

A SERVICE MODE
SERVICE MODE
VERSION
AREA/REGION
TEMPERATURE
MEMORY CHECK
DVD NTSC/PAL
DVD CHECK MODE
Exchanging it operate a menu
of a service mode with the [UP]
button and [DOWN] button.
Operate choice of a menu with
a [ENT] button.
Return to previous menu with
a [BACK] button.
A
SERVICE MODE
ERROR READ
ERROR CLEAR
BT VERSION
VERSION
MAIN V [ ]
JD8
CH
PANEL V V
P.DADJ
AREA/REGION
SYS-AREA :
JD8-AREA :
JD8-REGION :
JD8-CPPM : N FFFF
TEMPERATURE Temperature data reading
ETemperature data by the temperature sensor in
the main micon and JD8-PCB is read every 5
seconds and displayed in hex numbers.
MEMORY CHECK ( It is displayed only at the time of
the disc insertion )
Memory residual quantity indication mode
Data residual quantity of a disc is displayed by LCD.
About the playback control-related key ([FSKIP],
[BSKIP],[UP], [DOWN], [VOL]), only movement is
effective.
Indication does not change as memory residual
quantity indication.
About cancellation of this mode, press the
[STANDBY/ON ATTENUATOR] button.
DVD NTSC/PAL
NTSC
PAL
DVD CHECK MODE
See "DVD CHECK MODE" for details.
ERROR READ
DVD ERROR READ
CH ERROR READ
MECHA ERROR READ
READ ALL
B C
Micon version indication
Main micon version and
ROM correction version
JD8 version
CH version
[ ] Panel micon version and
ROM correction version
00 : Panel No adjustment
(factory use)
01 : Complete Panel
adjustmen (factory use)
Area and region indicattion
Main micon area
JD8 area
JD8 region
CPPM does not have
KD-AVX11
DVD picture change
JD8 output picture setting
(NTSC)
JD8 output picture setting
(PAL)
(No.MA304)1-29