JVC KD-AVX11J Service Manual page 13

3.1.5 Removing the Connection board assembly
(See Fig.10)
(1) From the bottom side of the DVD mechanism assembly, re-
lease the lock of the connector
board assembly and disconnect the card wire.
(2) Remove the three screws J attaching the Connection
board assembly on the DVD mechanism assembly. And re-
move the connection board assembly.
3.1.6 Removing the Rear bracket
(See Fig.11 and 12)
(1) Remove the one screw K attaching the Antenna cable, re-
move the one screw L attaching the CD-CH jack, remove
the one screw M attaching the IC bracket, remove the one
screw N attaching the Digital out jack and remove the two
screws P attaching the Rear bracket. (See Fig.11)
(2) Remove the three screws Q attaching the Wire holder.
(See Fig.11)
(3) Disconnect the connector wires from car cables connected
to connector CN931, CN311, and
board assembly. (See Fig.12)
(4) Disconnect the connector wire from Fan connected to con-
nector CN861 on the Main board assembly. (See Fig.12)
3.1.7 Removing the Main board assembly
(See Fig.12)
(1) Disconnect the card wire from connector
Main board assembly.
(2) Disconnect the connector wire from Gear assembly con-
nected to connector CN881
assembly.
(3) Remove the two screws R attaching the Main board as-
sembly.
CN965 on the Connection
CN361 on the Main
CN962 on the
and CN891 on the Main board
J
J
Fig.10
Q
K L P
Fig.11
CN881 CN891 CN962
CN931 CN361
Fig.12
CN965
M N P
R
CN311 CN861
(No.MA304)1-13