Nortel M 900 User Manual page 7

B E LT CLIP
Mounting instructions
Firstly, clean all surfaces using a cloth
moistened with alcohol.
1 • Remove the adhesive protection and
place it on the rear tab.
2• Position the tab on the mark on the
rear of the mobile above the loudspeaker
holes. Press firmly.
Leave the tab on the mobile for 72 hours
before use.
Instructions for use
The clip is used to attach the mobile to
your belt.
1 • Slide the tab into the clip to attach the
mobile.
Caution: the mobile must not be wed-
ged against your chair when you are
seated.
2 • To remove the mobile, press the
upper part of the clip and slide the mobile
upwards.
PAGE 8