Specifications - Makita BTD132 Instruction Manual

ENGLISH (Original instructions)
1-1. Red part
1-2. Button
1-3. Battery cartridge
2-1. Switch trigger
3-1. Lamp
4-1. Light button
5-1. Reversing switch lever

SPECIFICATIONS

Capacities
-1
No load speed (min
Impacts per minute
Net weight (with battery cartridge)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 2.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
6-1. Changed in three steps
6-2. Hard
6-3. Medium
6-4. Soft
6-5. Hammering force button
7-1. LED indicator
9-1. Bit
Model
Machine screw
Standard bolt
High tensile bolt
Hammer mode (Hard)
) Hammer mode (Medium)
Hammer mode (Soft)
Hammer mode (Hard)
Hammer mode (Medium)
Hammer mode (Soft)
Overall length
Rated voltage
) : 92 dB(A)
pA
) : 103 dB(A)
WA
value (tri-axial vector
2
) : 12.0 m/s
h
2
ENE033-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
ENG102-3
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENG205-2
sum)
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
ENG901-1
Cordless Impact Driver
Model No./ Type: BTD132
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
3
9-2. Sleeve
10-1. Bit
10-2. Sleeve
11-1. Groove
11-2. Hook
11-3. Screw
BTD132
4 mm - 8 mm
5 mm - 14 mm
5 mm - 12 mm
0 - 2,400
0 - 1,800
0 - 1,100
0 - 3,200
0 - 2,600
0 - 1,100
With one-touch bit holder 139 mm
Without one-touch bit holder 140 mm
1.4 kg
D.C.14.4 V
Corporation as
ENH101-13
the responsible