Table of Contents
Advertisement
User Guide SoundPoint IP 330/320
Note
Note
3 - 16
6. Press
to select the speed dial index for edit.
7. Do one of the following steps:
— Enter the next available speed dial index.
— Delete the existing speed dial index by using the Backspace soft key,
and then enter a new speed dial index.
8. Press the Ok or Cancel soft keys to accept or cancel changes.
9. Press
repeatedly to return to the idle display.
Press and hold the unassigned Line 2 key from the idle display to associate a
speed dial index. The next available speed dial index will be assigned
automatically.
To assign a new speed dial key:
1. Press and hold
A new empty entry in the contact directory is automatically opened
allowing contact information to be added.
2. Press
to enter a first name.
3. Enter the first name of the contact from the dial pad.
4. Press the Ok or Cancel soft keys to accept or cancel changes.
5. Press
to display the next field in the contact's entry.
6. Repeat steps 2 to 5 to enter the last name of the contact.
7. Repeat steps 2 to 5 to enter a contact number.
8. Repeat steps 2 to 5 to change the Speed Dial Index if desired.
The index can be any value between the next available index value and the
maximum (99).
Polycom recommends that you assign speed dial index values consecutively.
For example, the second Line Key is assigned to the speed dial index value "2".
9. Press the Yes or Cancel soft keys to accept or cancel changes.
10. Press
repeatedly to return to the idle display.
To add a speed dial contact if the Line 2 key is already assigned, refer to
Contacts
on page 1-1.
if unassigned.
Adding
Advertisement
Table of Contents
