Table of Contents
Advertisement
User Guide SoundPoint IP 330/320
2 - 10
10. Repeat steps 5 to 7 to change the Speed Dial Index if desired.
It is automatically assigned to the next available index value.
For more information, refer to
11. Repeat steps 5 to 7 to change the Ring Type and Divert Contact if desired.
These fields may be left blank.
For more information on setting the Ring Type field, refer to
Distinguishing Calls
For more information on diverting contacts, refer to
page 2-17.
12. Repeat steps 5 to 7 to change the Auto Reject, Auto Divert, Watch Buddy,
and Block Buddy if desired.
Use
,
,
settings.
For more information on setting the Auto Reject field, refer to
Calls
on page 1-1.
13. Press
to end contact's data entry.
14. Press the Yes or Cancel soft keys to accept or cancel changes.
15. Press
repeatedly to return to the idle display.
Adding Contacts From Call Lists
To add a contact to the local contact directory from a call list:
1. Do one of the following steps:
Press the Callers soft key to view the Received Calls list.
a
Press
b
2. Use
and
3. Press
to select the entry.
Assigning Speed Dial Indexes
on page 2-15.
, or
to switch between Enabled and Disabled
to view the Placed Calls list.
to scroll through the list to find the contact.
on page 3-15.
Diverting Calls
on
Rejecting
Advertisement
Table of Contents
