Bosch GDS Professional 24 Original Instructions Manual page 11

OBJ_BUCH-548-003.book Page 11 Wednesday, March 12, 2014 10:30 AM
WARNING! Important instructions for connecting a new
3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the following
code:
Do not connect the blue or brown wire to the earth terminal of
the plug.
Important: If for any reason the moulded plug is removed
from the cable of this power tool, it must be disposed of
safely.
Products sold in AUS an NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Technical Data
Impact Wrench
Article number
Rated power input
Output power
No-load speed
Max. torque for hard/soft screwdriving application according to
ISO 5393
Right/left rotation
Max. screw dia.
Tool holder
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
Bosch Power Tools
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Suspension hook
2 Auxiliary handle
3 Threaded for auxiliary handle
4 On/Off switch
5 Rotational direction switch
6 Tool holder
7 Tool bit
8 Handle (insulated gripping surface)
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
GDS 24
0 601 434 1..
W 800
W 400
-1
min 1260
Nm 600/300
M 24
 ¾"
kg 5.7
/ II
GDS 24
0 601 434 1..
dB(A) 95
dB(A) 106
dB
English | 11
GDS 30
0 601 435 1..
920
500
1260
1000/500
 
M 30
 1"
7.3
/ II
GDS 30
0 601 435 1..
99
110
3 3
3 609 929 D00 | (12.3.14)