Mounting The Rmp-5 On The Stand (Pds-2: Sold Separately) - Roland Rhythm Coach RMP-5 Owner's Manual

Getting Ready
Mounting the RMP-5 on the Stand
(PDS-2: Sold Separately)
1. First, open the tripod so the legs are spaced at least 50 cm
(20") apart.
2. Attach the wing screw and washer in the order shown
in the figure.
3. Attach the pad.
Turn the pad until the screw is just about all the way in;
then stop, and tighten the wing screw from underneath the
stand.
* Do not forcefully try to turn the pad after the screw is already all
the way in. Doing so may damage the stand's screw.
4. Adjust the angle of the pad.
Precautions When Folding the Tripod
When folding the PDS-2's tripod legs to store the unit, be cautious not to get your fingers pinched
while handling the stand.
8
50 cm (20")
or greater
Washer
Wing screw
Pad attachment
screw size: M8