External Unit - Panasonic SC-NS55 Operating Instructions Manual

External unit

Connecting and playing a USB mass Connecting and playing a USB mass
storage class device storage class device
MP3
The USB connectivity enables you to connect and play MP3
tracks from USB mass storage class. Typically, USB memory
devices. (Bulk only transfer)
Preparation
Before connecting any USB mass storage device to the unit,
ensure that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The
USB device is not recognised by this unit.
Reduce the volume and connect the USB mass
1
storage device.
Press [USB 6] to start play.
2
12
12
Numeric
buttons
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised
by this unit.
To Action
Press [USB 6].
pause play
Press again to resume play.
stop play Press [7].
"RESUME" is displayed. The position is
memorized.
Press [USB 6] to resume.
Press [7] again to clear the position.
skip track Press [ /4] or [ /¢].
skip album Press [ALBUM
Press [ALBUM
the numeric buttons in the stop mode.
Display function Display function
Press [DISPLAY] repeatedly during play or pause mode.
Elapsed time Remaining time
ID3 (Artist) ID3 (Track)
For other operating functions, they are similar as those
described in "Discs" ( ➡ page 7 and 8).
Compatible devices Compatible devices
Devices which are defi ned as USB mass storage class:
• USB devices that support bulk only transfer.
• USB devices that support USB 2.0 full speed.
Supported Format Supported Format
Files must have the extension ".mp3" or ".MP3".
Note
• CBI (Control/Bulk/Interrupt) is not supported.
• A device using NTFS fi le system is not supported [Only FAT 16/32
(File Allocation Table 16/32) fi le system is supported].
• Depending on the sector size, some fi les may not work.
• This unit can access up to 255 albums (including blank folders) and
2500 tracks.
• The maximum number of tracks in a folder are 999 tracks.
• Only one memory card will be selected when connecting a multiport
USB card reader. Typically the fi rst memory card inserted.
• Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
• When you connect your digital audio player to the USB jack, it
charges all the time except in standby mode or during option port
charging mode.
or ] in the play mode.
or ] once and then
Album name Track name
ID3 (Album)