Prerequisite Requirements; Verifying The Package Contents - Symbol cb3000 Installation Manual

Prerequisite Requirements

The following hardware and software resources are required to install and operate a CB3000 and use
the CB3000 Discovery Tool:
• PC to be used during device configuration. The PC must have an RJ-45 Ethernet port and a
CDROM drive. The PC must be running the following:
• Windows 2000 or XP operating system
• A browser interface running Internet Explore 5.0 (or higher) or Netscape 6.0 (or higher)
• An access point (for infrastructure mode operation) or a networked client (for Ad-hoc mode
peer-to-peer operation).

Verifying the Package Contents

Before installing the CB3000, verify the package contains the following:
• CB3000 Installation Guide (this guide)
• CB3000 Software and Documentation CDROM
• CB3000 Client Bridge (Part No. CB-3000-0010-WWR)
• Ethernet cable
• Power adapter with 4 localized plugs
• Detachable omni-directional 802.11a/b/g antenna.
• Mounting hardware.
!
CAUTION Only qualified and approved antennas may be used with the CB3000.
NOTE Contact the Symbol Support Center to report any missing or improperly
functioning components.
2