Port Forwarding - D-Link DIR-808L User Manual

Section 3 - Configuration
The Port Forwarding section will allow you to open a single port or a range of ports in your router.
Name:
Enter a Name for the rule or select an Application
Name from the drop-down menu. When an
Application Name is selected, click << to populate
the field.
IP Address:
Enter the IP Address of the computer on your
local network that you want to allow the incoming
service to. If your computer is receiving an IP address
automatically from the router (DHCP), you computer
will be listed in the Computer Name drop-down
menu. Select your computer and click <<.
Ports to Open
Enter the TCP and/or UDP port or ports that you
TCP/UDP:
want to open. You can enter a single port or a range
of ports. Separate ports with a comma.
Example: 24,1009,3000-4000
Schedule:
The schedule of time when the Port Forwarding Rule
will be enabled. The schedule may be set to Always,
which will allow the service to always be enabled. You
can create your own times in the Tools > Schedules
section.
Inbound Filter:
Select Allow All (most common) or a created
Inbound filter. You may create your own inbound
filters in the Advanced > Inbound Filter page.
D-Link DIR-808L User Manual

Port Forwarding

70