Ac/N/A (5Ghz) - D-Link DIR-808L User Manual

Section 3 - Configuration
Enable Wireless:
Check the box to enable the wireless function. If you do not want to
use wireless, uncheck the box to disable all the wireless functions.
Schedule:
Select the time frame that you would like your wireless network
enabled. The schedule may be set to Always. Any schedule you
create will be available in the drop-down menu. Click Add New to
create a schedule.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless network.
Name:
Create a name for your wireless network using up to 32 characters.
The SSID is case-sensitive.
802.11 Mode:
Select one of the following:
802.11n Only - Select only if all of your wireless clients are 802.11n.
802.11ac Only - Select only if all of your wireless clients are 802.11ac.
Mixed 802.11n and 802.11a - Select if you are using both 802.11n
and 802.11a wireless clients.
Mixed 802.11ac and 802.11n - Select if you are using both 802.11ac
and 802.11n wireless clients.
Mixed 802.11ac, 802.11n and 802.11a - Select if you are using a
mix of 802.11ac, 802.11n, and 802.11a wireless clients.
Enable Auto Channel
The Auto Channel Scan setting can be enabled to allow the DIR-808L to choose the channel with the least amount of interference.
Scan:
Wireless Channel:
Indicates the channel setting for the DIR-808L. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the
wireless network. If you check Enable Auto Channel Scan, this option will be greyed out.
Channel Width:
Select the Channel Width:
20MHz - Select if you are not using any 802.11n wireless clients.
Auto 20/40MHz - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
Auto 20/40/80MHz - Select if you are using 802.11ac, 802.11n and non-802.11n wireless devices. This option is only available when the 802.11 Mode is set
to Mixed 802.11ac.
Visibility Status:
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-808L. If Invisible is selected, the SSID of the DIR-808L will
not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-808L in order to connect to it.
Wireless Security:
Refer to page 44 for more information regarding wireless security.
D-Link DIR-808L User Manual

802.11ac/n/a (5GHz)

43