NordicTrack SL 700 NTCCC59021 User Manual page 16

HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into the
LINE OUT jack on your stereo.
A
Audio Cable
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
cable into the adapter. Plug the adapter into an
RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the
wire into the unused side of the Y-adapter. Plug the
Y-adapter into the LINE OUT jack on your stereo.
B
Audio
Cable
Wire removed from
LINE OUT jack
HOW TO CONNECT YOUR COMPUTER
Note: If your computer has a 3.5 mm (1/8 in.) LINE
OUT jack, see instruction A. If your computer has
only a PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
CD
VCR
Amp
LINE OUT
LINE OUT
Adapter
B. Plug one end of the audio cable into the jack
CD
VCR
Amp
LINE OUT
RCA
Y-adapter
Adapter
16
beneath the console. Plug the other end of the
cable into the LINE OUT jack on your computer.
A
beneath the console. Plug the other end of the
cable into a 3.5 mm (1/8 in.) Y-adapter (available at
electronics stores). Plug the Y-adapter into the
PHONES jack on your computer. Plug your head-
phones or speakers into the other side of the Y-
adapter.
B
Audio Cable
Headphones/Speakers
LINE OUT
Audio
Cable
PHONES
3.5 mm
Y-adapter