Rear Panel - Sony NSP-1 Operating Instructions Manual

Rear Panel

a
(network) connector (RJ-45 modular jack)
This is a 10BASE-T/100BASE-TX connector for network
(Ethernet) connection.
Caution
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to this
port. Follow the instructions for this port.
b AUDIO IN L/R connectors (pin jacks)
These input analog audio signals.
c VIDEO IN connector (pin jack)
This inputs the analog composite video signal.
6
Names and Functions of Parts
1 (Network) connector
2 AUDIO IN L/R connectors
3 VIDEO IN connector
4 AUDIO OUT L/R connectors
qa
qs (Analog RGB OUT) connector
qd USB connectors
5 VIDEO OUT connector
6 Reset button
7 Dip switches
8 DC IN 13.5V connector/Metal cable
retainer
9 Cable lock
0 GPI connector
(SERIAL) connector
d AUDIO OUT L/R connectors (pin jacks)
These output the playback audio as an analog signal. For a
stereo signal, connector L outputs the left channel, and
connector R outputs the right channel
e VIDEO OUT connector (pin jack)
This outputs the playback video as a composite signal.
f Reset button
Used to forcibly restart this unit when it hangs or freezes.
Push this button using a sharply pointed tools, such as a
pencil or stretched paper clip.
g Dip switches
Used for various services. Set all switches to OFF.