Making Account Settings; When All Of The Settings For All Of Pages Are Completed - Sony NSP-1 Operating Instructions Manual

To display specified material: Select "Specified
Contents" from "Recovery Mode". When "Specified
Contents" is selected, enter the index number of the
materials in the "Index" box.
10
Click the "Send" button.
The settings carried out on this page are sent to the
NSP-1.
To resume the setup process, go to another page
without carrying out step 11.
11
Click the "Reboot" button.
This unit is turned off and then on again. The settings
made are now valid.

Making Account Settings

To access the Web page of the NSP-1, it is necessary to
enter a user name and password. The Account Settings
page allows you to change the passwords.
Users cannot access this page without proper
authorization.
Note
Be sure to change the passwords.
The number of characters that can be entered to make up a
password is between 6 and 14 characters.
You can use alphabetical and numeric characters
excluding *, [, ], \, %, /, $, ", &, and '.
Setting/changing the password for the
administrator
This is the password for a user who is authorized to make
system settings for this unit.
1
Enter the new password in the "Password" text box of
the "Administrator Account" column.
2
Enter the same password as the one entered in step 1.
3
Click the "Send" button.
The password for the Administrator Account is
changed.
Setting/changing a password for a
operator user account
This is the password for a user who accesses this unit from
the application software.
This user is allows to open the status page.
1
Enter the new password in the "Password" text box of
the "Operator Account" column.
2
Enter the same password as the one entered in step 1.
3
Click the "Send" button.
The password for the Operator Account is changed.
Setting/changing a password for status
user account
This is the password for a user who is allowed only to
access the status page.
1
Enter the new password in the "Password" text box of
the "Status User Account" column.
2
Enter the same password as the one entered in step 1.
3
Click the "Send" button.
The password for the Status User Account is changed.
Setting/changing a password for the root
account
This is the password to be used for performing
maintenance or making special settings such as creating
new application software. It is recommended that you
change the password for the root account when a security
may be a problem because the network is connected to
public networks, etc.
1
Enter the new password in the "Password" text box of
the "Root Account" column.
2
Enter the same password as the one entered in step 1 in
the "Confirmation" text box.
3
Click the "Send" button.
The password for the Root Account is changed.
When All of the Settings for All of
Pages Are Completed
Click the "Reboot" button on the last page where you made
the settings.
This unit is turned off and then is turned on again.
Settings made on each page are now valid.
Note
When the Account Settings page is the last page where you
made settings, open a different page and click the
"Reboot" button on that page.
13
Setup