NordicTrack V-FLEX NTPRSY3415.0 User Manual page 12

20. Attach a 2 3/4" Pulley (23) to the right Press Arm
(8) with an M10 x 53mm Button Bolt (61), two
M10 Washers (71), two 5mm Spacers (25), two
Finger Guards (27), and an M10 Nylon Locknut
(73). See the inset drawing. Orient the Finger
Guards and Pulley as shown. Make sure the
Press Arm Cable (30) is in the groove of the
Pulley.
21. Make sure the Press Arm Cable (30) is routed
under the indicated welded rods.
Attach a "V"-pulley (22) to the Swivel Arm (16)
with an M10 x 64mm Button Bolt (75), two M10
Washers (71), two 5mm Spacers (25), and an
M10 Nylon Locknut (73).
22. Attach the Backrest (18) and the Backrest Base
(88) to the Upright (3) with the two M6 x 25mm
Screws (60) and the indicated M6 x 140mm
Screw (79).
23. Attach the Headrest (90) and the Headrest Base
(89) to the Upright (3) with the two indicated M6 x
140mm Screw (79).
20
25
30
27 8
23
27
71
61
21
Welded
Rods
16
73
71
25
25
30
22
22
88
18
23
89
90
12
73
27
71
25
25
75
71
79
60
60
3
3
79
27