NordicTrack NTBE01700 User Manual page 8

7. Press the 3/4" x 2" Inner Cap (33) into the open
end of the Seat Mounting Bracket (23).
Lubricate a 3/8" x 3" Bolt (21). Attach the Seat
Adjustment Bracket (36) to the indicated side of the
Seat Mounting Bracket (23) with the Bolt and a 3/8"
Nylon Locknut (11). Note: Do not overtighten the
Nylon Locknut; the Seat Adjustment Bracket
must pivot easily.
8. Place the Seat Mounting Bracket (23) on the Bench
Frame (5) so that the Seat Adjustment Bracket (36)
fits over the welded pin on the side of the Bench
Frame.
Lubricate a 3/8" x 3" Bolt (21). Attach the Seat
Mounting Bracket (22) to the indicated bracket on
the Bench Frame (5) with the Bolt and a 3/8" Nylon
Locknut (11). Note: Do not overtighten the Nylon
Locknut; the Seat Mounting Bracket must pivot
easily.
9. Turn the Seat (14) as shown. Attach the wide end
of the Seat to the bracket on the Seat Mounting
Bracket (23) with two 1/4" x 3/4" Screws (3) and
two 1/4" Washers (30).
Tilt the Seat Mounting Bracket (23) upwards and
attach the narrow end of the Seat (14) to the Seat
Mounting Bracket with a 1/4" x 1 1/4" Screw (34)
and a 1/4" Washer (30).
10. Attach the Adjustable Bench Leg (2) to the Bench
Leg (1) with the Adjustment Knob (37).
Insert a 1 1/2" Square Inner Cap (40) into the top of
the Adjustable Bench Leg (2).
7
21
Lubricate
33
8
23
21
Lubricate
Welded
Pin
9
14
Bracket
23
34
10
40
37
1
8
36
23
36
11
5
30
3
2
11