Commissioning, Inspection, Maintenance; Steps - Commissioning, Inspection And Maintenance - Viessmann VITOCROSSAL 300 Service Instructions Manual

Steps - commissioning, inspection and maintenance

For further information regarding the individual steps, see the page indicated
•
•
•
• • •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
• •
•
•
Commissioning steps
Inspection steps
Maintenance steps
1. Checking the high limit safety cut-out setting.............
2. Filling the heating system with water and venting the
system.............................................................................
3. Filling the siphon with water.........................................
4. Commissioning the system........................................... 10
5. Shutting down the system............................................. 10
6. Opening the boiler door................................................. 10
7. Separating the neutralising system (if installed) from
the boiler and connecting the drain hose.................... 11
8. Cleaning the combustion chamber and heating
surfaces........................................................................... 11
9. Checking components exposed to flue gas for
corrosion damage
10. Checking the gaskets, packing cords and thermal
insulation components of the boiler door.................... 12
11. Checking gaskets and thermal insulation
components on the boiler.............................................. 13
12. Checking the function of safety valves
13. Checking the mixer for ease of operation and
tightness.......................................................................... 14
14. Checking the water quality............................................ 14
15. Cleaning and reconnecting the condensate drain
system............................................................................. 15
16. Checking the condensate drain and the neutralising
system (if installed)........................................................ 16
17. Closing the boiler door.................................................. 16
18. Checking the installation room ventilation
19. Checking the flue system for leaks

Commissioning, inspection, maintenance

Page
9
9
9
7