Assembly - NordicTrack 831.23665.0 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own phillips screwdriver
wrench , and rubber mallet
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. If a part is not in the parts bag, check to see if it has been preassembled.
Wave Washer Large Wave
(101)–2 Washer (102)–4
M10 Split
Washer (99)–2
M8 x 19mm Button
Screw (85)–6
M8 x 45mm Button
Screw (90)–6
1. See HOW TO FOLD AND UNFOLD THE
ELLIPTICAL EXERCISER on page 11 and
unfold the elliptical exerciser.
While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 78mm Carriage
Bolts (92) and two M10 Nylon Locknuts (82).
M8 Split
Washer (97)–16
M10 Nylon
Screw (78)–6
Locknut (82)–2
M8 x 23mm Button
Screw (86)–4
.
M8 Washer M8 x 23mm x
(95)–4 1mm Washer
(31)–4
M4 x 16mm M4 x 16mm
Round Head
Screw (80)–21
M10 x 78mm Carriage Bolt (92)–2
M10 x 80mm Button Screw (93)–2
1
92
4
5
, adjustable
M8 x 23mm x
2mm Washer
(96)–8
M8 x 14mm Button
Screw (84)–6
82
1
82