Advertisement
1. BEFORE STARTING UP
This is a step-by-step instruction on how to start up the VRT-420N and get
connected to the Internet.
1. Setup your network as shown in the setup diagram below.
Internet
NB
2. Then, you need to setup your LAN PC clients so that it can obtain an IP address
automatically. By default the VRT-420N's DHCP server is enabled so that you can
obtain an IP address automatically.
Please make sure that the VRT-420N's DHCP server is the only
DHCP server available on your LAN. If there is another DHCP on
your network, then you'll need to switch one of the DHCP servers
Note
off.
ADSL
LAN
PC
Power Adapter
5V 2A
3
Advertisement
