Preparing Your Radio For Use; Charging The Battery; Attaching The Battery - Motorola APX 4000 User Manual

Model 3
Hide thumbs Also See for APX 4000:
Table of Contents

Advertisement

Preparing Your Radio for Use

This section provides simple instructions to prepare
your radio for your.

Charging the Battery

Warning: To avoid a possible explosion:
Do not replace the battery in any area
labeled hazardous atmosphere.
Do not discard batteries in a fire.
The Motorola-approved battery shipped with your
radio is uncharged. Prior to using a new battery,
charge it for a minimum of 16 hours to ensure
optimum capacity and performance. For a list of
Motorola-authorized batteries and chargers available
for use with your radio, see
183.
Note:
When charging a battery attached to a radio, turn the
radio off to ensure a full charge.
To charge the battery, place the battery (with or
without the radio), in a Motorola-approved charger.
20
English
Accessories
on page
The LED on the charger indicates the charging
progress; see the charger user guide.

Attaching the Battery

You can view the status of the IMPRES
radio is using an IMPRES battery. See
Battery Annunciator
on page 174 for more
information.
1 Slide the battery into the radio frame until the latch
which is at the bottom of the radio clicks into
place.
See the following picture for MFK radio.
battery if the
IMPRES

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents