Motorola APX 4000 User Manual page 152

The radio starts pairing to the device.
To continue with Bluetooth pairing, please see
with Low Frequency-Motorola Proximity Pairing (LF-
MPP) Feature
Turning Bluetooth Visibility On
Turning Bluetooth visibility to on enables other
Bluetooth devices to search for your radio. The
visibility of the Bluetooth is set to off by default.
The following methods are options on how to turn
Bluetooth visibility on. The result of all the methods is
the same. You can use the options interchangeably
depending on your preference and the programmed
functions.
• Turn Bluetooth visibility on via radio menu BT:
a)
or to BT. Press the Menu Select button
directly below BT to access the Bluetooth
feature screen.
b)
or
Select button directly below On.
The status changes to Visible to all.
Visibility mode is enabled.
148
English
on page 145.
to Visibility and press the Menu
When the timer expires, the status changes to
Visibility failed. Repeat the procedure to
Pairing
turn Bluetooth visibility on.
• Turn Bluetooth visibility on via the preprogrammed
button.
a) Press the preprogrammed button to enable the
Bluetooth visibility feature.
You hear a short, medium-pitched tone. The
display shows momentary Visible to all.
Visibility mode is enabled.
When the timer expires, the display shows
momentary Visibility failed. Repeat the
procedure to turn Bluetooth visibility on.
Note: Press the preprogrammed to toggle the
Bluetooth visibility on or off.
Receiving Pairing Request from other Devices
When your radio receives a pairing request from
other device, the display shows <Device Friendly
Name>pair request.
Press the Menu Select button below Ok to accept
or Cncl to refuse pairing request.