Sending A Quick Text Message - Motorola APX 4000 User Manual

•
or to [Other Recpnt] and press the
Menu Select button below Edit. When a
blinking cursor appears in the Enter Address
screen, use the keypad to type the address
entry.
9 Press the Menu Select button directly below Send
or press the PTT button to send the message.
The display shows the Send Message screen and
Sending msg.
If the message is sent, you hear a tone and the
display shows Msg sent.
If the message is not sent, you hear a low tone,
the display shows Send failed and returns to the
main TMS screen.
Note: You can append a priority status and/or a
request reply to your message. See
and Request Reply of a New Text Message
page 106 for more information.
You can also select the Save to Drafts option to
save your message in the Drafts folder to send it
at a later time. See Accessing the Drafts Folder
page 111 for more information.

Sending a Quick Text Message

Quick Text messages are messages that are
predefined and usually consist of messages that are
used most frequently.
Each Quick Text message or Query has a maximum
length of 50 characters. You can select the required
text from the Quick Text or Query.
1 Perform one of the following actions:
•
•
2
directly below TMS to access the TMS feature
Priority Status
screen.
on
3 Perform one of the following actions:
•
on
•
To access this feature via a preprogrammed
button, press the preprogrammed Quick Text
button and proceed to Step 4.
To access this feature via the menu, proceed
to the next step.
or to TMS and press the Menu Select button
or to Compose and press the Menu
Select button directly below Sel.
Press the Menu Select button directly below
Exit to return to the Home screen.
105
English