Part Names And Functions Of The Remote Controller; Operation Section - Toshiba MD-VNK802HEXE Service Manual

4
Part Names and Functions of the Remote
Controller
Remote controller for the Air to Air Heat Exchanger with DX Coil
Unit (NRC-01HE)
◆

Operation section

• One of these remote controllers can be used to control both indoor air
conditioner units and Air to Air Heat Exchanger with DX Coil Units (up to 8
units in total).
• After setting the operation conditions, you can use the units by just pressing
the ON/OFF button.
• Functions concerning controlling the Air to Air Heat Exchanger with DX Coil
Unit are explained here. For controlling an air conditioner, refer to the
owner's manuals supplied with the remote controller and the air conditioner.
1
button (Fan speed select button) (*1)
2
button (Timer set button)
Used for timer setting
3
button (Test button)
Used for service.
Do not use this button in everyday operations.
4
button (*1) (Ventilation button)
This button is used when the Air to Air Heat
Exchanger with DX Coil Unit is in a system linked
with air conditioners. Push the
on/off the Air to Air Heat Exchanger with DX Coil
Unit. Turning on/off the air conditioner also turn on/
off the Air to Air Heat Exchanger with DX Coil Unit.
* No Air to Air Heat Exchanger with DX Coil
5
Resets "
6
Use to initiate power saving mode.
button to turn
122
Unit is connected or separate operation of the
Air to Air Heat Exchanger with DX Coil Unit is
not set, if " " appears on the remote
controller display after pushing the
button.
button (Filter reset button)
FILTER" indication after cleaning.
button (Power save operation)
Owner's Manual
Display
section
Operation
section