13
Exchanging and assembling the main
components
No.
Component
1
Inspection cover
1.
2
Heat exchange
element
1., 2.
3
Element rail
1. to 3.
4
Foam cover
1. to 4.
Procedure
1.Remove the fixing cover, loosen the fixing screw,
and then remove the inspection cover.
2.Hold the handle of the heat exchange element, and
then pull it out.
Note:
A single heat exchange element weighs 2 - 4 kg
(there are two elements). Be careful not to drop it.
3.Remove the two screws (M4 × 6) that fix the element
rail to pull the rail out.
4.Slide the foam cover to the center of the product to
pull it out.
Fixing screw
182
Note
Fixing lever
Handle of Heat exchanger
Screws (M4 × 6)
Element rail on the
left and right side
Foam cover