Table of Contents
Advertisement
3. Telephone
Display while viewing
L When the unit could not receive a name, the
display will show "NO NAME RCVD".
L When no calls have been received, the
display will show "NO CALLER DATA".
To edit a telephone number for calling back
Press {*} repeatedly after step 2. Each time
you press {*}, the telephone number will be
changed as follows:
11 - Area code - Local telephone number ("1"
added)
2Local telephone number only (area code
omitted)
3Area code - Local telephone number
41 - Local telephone number ("1" added and
area code omitted)
L You can change the area code if it is wrong by
pressing the correct number using the dial
keypad.
To stop viewing
Press {STOP} after step 2 on page 27.
3.5.1 Erasing all caller
information
1
Press {MENU} repeatedly to display
"CALLER SETUP".
2
Press {SET}.
3
Press {SET}.
L To cancel erasing, press {STOP} 3 times.
4
Press {SET}.
5
Press {STOP}.
3.5.2 Erasing specific caller
information
1
Press {CALL DISPLAY}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {<}.
L To cancel erasing, press {STOP} 2 times.
4
Press {SET}.
L To erase other items, repeat steps 2 to 4.
5
Press {STOP}.
28
Another method to erase a specific caller's
information
1. Press {CALL DISPLAY}.
2. Press {A} or {B} repeatedly to display the
desired item.
3. Press {ERASE}.
L To erase other items repeat steps 2 to 3.
4. Press {STOP}.
Advertisement
Table of Contents
