Table of Contents
Advertisement
4. Fax
will tell you if there are any new voice
messages. The unit will answer on the 2nd
ring when there is at least one new recorded
message. The unit will answer on the 4th ring
when there are no new recorded messages.
If you do not want to listen to old messages,
hang up when you hear the 3rd ring, because
it indicates there are no new messages. You
will not pay for the call.
– "RINGER OFF": The unit will answer without
ringing.
L If you subscribe to a Call Display service, set
to 2 or more rings.
36
4.7 Junk fax prohibitor
(preventing fax reception
from undesired callers)
If you subscribe to Call Display service, this
feature prevents fax reception from calls that do
not show caller information.
Additionally, faxes originating from numbers that
match a programmable junk fax prohibitor list will
not be accepted by the fax machine (page 36).
L Keep the front cover page open for button
locations.
Important:
L This feature does not work when:
– the unit is set to the TEL mode, or
– manual reception is performed.
4.7.1 Activating the junk fax
prohibitor
1
Press {MENU} repeatedly to display "JUNK
FAX PROH.".
2
Press {>}.
3
Press {A} or {B} repeatedly to select "ON".
4
Press {SET}.
5
Press {STOP}.
L While the junk fax prohibitor is activated,
"JUNK FAX ON" is displayed.
4.7.2 Programming undesired
callers
You can register up to 10 undesired numbers
from the callers list (page 27) if you do not wish
to receive faxes from them.
1
Press {MENU} repeatedly to display "JUNK
FAX PROH.".
2
Press {>} repeatedly to display "JUNK
LIST SET".
3
Press {SET}.
4
Press {A} or {B} repeatedly to display the
party you wish to prevent fax reception from.
5
Press {SET}.
L To program other parties, repeat steps 4
to 5.
6
Press {STOP} to exit the program.
Advertisement
Table of Contents
