Programmable Function Keys - Icom ic-F3262DT Instruction Manual

2
PANEL DESCRIPTION

Programmable function keys

■
The following functions can be assigned to the [EMR],
[Side1], [Side2], [Side3], [P0], [P1], [P2] and [P3] program-
mable function keys in the Normal mode and the Shift mode.
When [Shift] is assigned, you can toggle between Normal
mode and Shift mode, and both key functions, assigned into
the Normal mode and the Shift mode, are available.
If [Shift] is not assigned to any key, the Shift mode cannot be
selected, and the Shift mode key functions are disabled.
Consult your Icom dealer or system operator for details con-
cerning your transceiver's programming.
CH UP AND DOWN KEYS "UP" "DOWN"
➥ Push to select an operating channel. When [Rotary selec-
tor] selects "operating channel," this key is disabled.
➥ As described in the following topics, after pushing a pro-
grammed key, push [CH Up] or [CH Down] to select an
option, setting, etc.
ZONE KEY "ZONE"
Push this key, then push [CH Up] or [CH Down] to select
the desired zone. When [Rotary selector] selects "operating
zone," this key operation is disabled.
What is a "zone"?— Selected channels are assigned to a
zone according to how they are to be used in a group. For
example, 'Staff A' and 'Staff B' are assigned to a "Busi-
ness" zone, and 'John' and 'Cindy' are assigned to a "Pri-
vate" zone.
7
ZONE UP AND DOWN KEY "ZNUP" "ZNDN"
Push to select an operating zone. When [Rotary selector] se-
lects "operating zone," these key are disabled.
SHIFT KEYS "SHFT"
Push to switch the Normal mode key functions and the Shift
mode key functions.
• When the Shift mode is selected, the display briefly shows "SHIFT
ON." When the Normal mode is selected, the display briefly shows
OFF."
"SHIFT
Normal mode
001 ch-02
T2 461.5
CALL SHFT dPMR CLR
Push
[Shift]
001 ch-02
T2 461.5
SET SHFT CALL TXCE
Shift mode
Normal mode
key functions
Shift mode
Key functions