Table of Contents
Advertisement
TONE/CC CHANNEL SELECT KEY "T SEL"
➥ While in the analog mode, push to enter the continuous
tone selection mode. Then push [CH Up] or [CH Down] to
select the desired tone frequency/code setting. After se-
lecting, push this key again to store the setting.
➥ While in the digital mode, push to enter the CC selection
mode. Then push [CH Up] or [CH Down] to select the de-
sired CC. After selecting, push this key again to store the
setting.
➥ While in the mixed (digital and analog) mode, push to enter
the continuous tone selection mode. Then push [CH Up] or
[CH Down] to select the desired tone frequency/code set-
ting. After selecting, push this key to store the setting. After
that, the CC selection screen appears. Push [CH Up] or
[CH Down] to select the desired CC. After selecting, push
this key again to store the setting.
C.TONE CH ENT KEY "TSEL"
Push to enter the continuous tone channel selection mode.
Then push [CH Up] or [CH Down] to select the desired tone
frequency/code setting. The selected channel remains set as
a continuous tone channel until another channel is designat-
ed as such.
PANEL DESCRIPTION
TALK AROUND KEY "TA"
Push to turn the Talk Around function ON or OFF.
Talk Around
• The
function equalizes the transmit frequency to the
receive frequency for transceiver-to-transceiver communication.
WIDE/NARROW KEY "W/N"
Push to toggle the IF bandwidth between Wide, Mid* or
Narrow.
• The wide passband width is preset to either 25.0 or 20.0 kHz by
your dealer (PMR operation only).
* Depending on the presetting, Mid channel width may not be
selectable. Ask your dealer for details.
DTMF AUTODIAL KEY "DTMA"
Push to enter the DTMF channel selection mode. Then push
[CH Up] or [CH Down] to select a desired DTMF channel.
After the selection, push again to transmit the selected DTMF
code.
RE-DIAL KEY "DTMR"
Push to transmit the last-transmitted DTMF code.
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
10
Advertisement
Table of Contents
