1. Group Name
Enter the Group Name. This is to identify the Dial By Name group. The Dial By Name group can be
used as the destination for inbound route and key pressing event for IVR. The group name defined
here will show up in the destination list when configuring IVR and inbound route. If Dial By Name is set
as a key pressing event for IVR, user could use '*' to exit from Dial By Name, then re-enter IVR and
start a new event. The following example shows how to use this option.
Firmware Version 1.0.10.39
Figure 149: Dial By Name Group In IVR Key Pressing Events
UCM6100 Series IP PBX User Manual
Page 258 of 331