Firmware Version 1.0.3.13; Firmware Version 1.0.2.21 - Grandstream Networks UCM6100 Series User Manual


Added option "Skip voicemail password verification" on extension edit page. [Table 34: SIP Extension
Configuration Parameters]

Added Hot-Desking Support. [Table 34: SIP Extension Configuration Parameters]

Added one-button on-demand call recording for GXP

Add new option to enable or disable "FXS TISS Override" on Hardware Config page. [Table 90:
Internal Options/Ports Config]

Added more modes for FXS Two-Wire Impedance Synthesis

Added LDAP Sync manual trigger function and synced date displaying. [VOIP TRUNKS]

Improved LDAP Sync function, added retrying, file verifying and progress displaying function

Added option "Pick Extension Period" on auto-provision settings page of Zero Config

Added multiple extension assignment support on device edit page of Zero Config

Added "Reset All Extensions" button at the Zero Config page to recycle all assigned extensions.
[AUTO PROVISIONING]

Added system crash alarm, core dump detection and allow users to download core dump file. [Figure
176: System Events->Alert Events Lists: System Crash]

Add "Keep Trunk CID" option for VoIP trunks, and keep the priorities: DOD->Extension
CallerID->Trunk CallerID->Global CallerID. [Table 50: Create New SIP Trunk]

FIRMWARE VERSION 1.0.3.13


Added Fail2Ban support for SIP authentication. [FAIL2BAN]

Added voice prompt "Language" selection and "Auto Record" option for extension. [Table 34: SIP
Extension Configuration Parameters] [Table 46: Batch Add SIP Extension Parameters]

Added "Auto Record" option for trunk.

Added "Digit Timeout" option and voice prompt "Language" selection for IVR. [Table 62: IVR
Configuration Parameters]

Added "Direct Dial Voicemail Prefix" feature code to directly dial or transfer to extension's voicemail.
[Table 76: UCM6100 Feature Codes]

Added "Enforce Strong Passwords" option. [Table 77: Internal Options/General]

Added FXS MWI Mode. [Table 90: Internal Options/Ports Config]

Added system events with alert and Email notification support. [SYSTEM EVENTS]

Added new web page for recording files. [RECORDING FILES]

FIRMWARE VERSION 1.0.2.21


Added weight information. [Table 1: Technical Specifications]

Added NTP server support. [NTP SERVER]

Added Czech language for web GUI display. [WEB GUI LANGUAGES]

Added VLAN support. "Layer 2 QoS 802.1Q/VLAN tag" and "Layer 2 QoS 802.1p priority value"
options for network port settings are added. [NETWORK SETTINGS]

Updated LDAP client configurations information.
Firmware Version 1.0.10.39 UCM6100 Series IP PBX User Manual Page 24 of 331