Active Data Connections; Synchronisation - Nokia N97 User Manual

WLAN internet access points
Select Menu Settings
>
Destinations Access
>
To edit a wireless LAN (WLAN) access point, open one of the
access point groups, and select an access point marked with
.
Follow the instructions from your WLAN service provider.
Select from the following:
WLAN network name — Select
for networks. If you select an existing network, WLAN
network mode and WLAN security mode are determined by
the settings of its access point device.
Network status — Define whether the network name is
displayed.
WLAN network mode — Select
network and to allow devices to send and receive data
directly; a WLAN access point device is not needed. In an ad
hoc network, all devices must use the same WLAN network
name.
WLAN security mode — Select the encryption used: WEP,
802.1x, or WPA/WPA2 (802.1x and WPA/WPA2 are not
available for ad hoc networks). If you select
no encryption is used. The WEP, 802.1x and WPA functions
can be used only if the network supports them.
Homepage — Enter the web address of the starting page.
Use access point — Set the device to create a connection
using this access point automatically or after confirmation.
© 2009 Nokia. All rights reserved.
and Connectivity
>
point, and follow the instructions.
Enter manually
Ad-hoc to create an ad hoc
Open
The available options may vary.

Active data connections

Select Menu
mgr..
In the active data connections view, you can see open data
connections:
data calls
packet data connections
wireless LAN (WLAN) connections
or Search
To end a connection, select
To end all open connections, select
all.
To view the details of a connection, select
Details.

Synchronisation

With the Sync application, you can synchronise your notes,
messages, contacts, and other information with a remote
server.
network,
Select Menu
Sync.
You may receive synchronisation settings as a configuration
message from your service provider.
Settings and Connectivity
>
Options > Disconnect.
Options
Settings Connectivity
> >
Connection
>
Disconnect
>
Options
>
Data transfer
> >
69